#{Boontdusties.com}

I want to memorize this and use it as a morning prayer.

In 1946 one of the earliest references to the turbo-encabulator appeared in Time on, April 15, 1946 by Bernard Salwen, a New York lawyer working in Washington, DC. Part of Salwen’s job was to review technical manuscripts. He was amused by the jargon and wrote the classic description of a non-existent turboencabulator.

The following quote is from the Time article. “General Electric”, “Chrysler” and “Rockwell Automation” use many of the same words.[1]

“Work has been proceeding in order to bring perfection to the crudely conceived idea of a machine that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of automatically synchronizing cardinal grammeters. Such a machine is the ‘Turbo-Encabulator’.

“The original machine had a base-plate of prefabulated amulite, surmounted by a malleable logarithmic casing in such a way that the two spurving bearings were in a direct line with the pentametric fan. … The main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots in the stator, every seventh conductor being connected by a nonreversible trem’e pipe to the differential girdlespring on the ‘up’ end of the grammeters.

“Forty-one manestically spaced grouting brushes were arranged to feed into the rotor slipstream a mixture of high S-value phenylhydrobenzamine and 5% reminative tetryliodohexamine. Both of these liquids have specific pericosities given by P = 2.5C.n^6-7 where n is the diathetical evolute of retrograde temperature phase disposition and C is Cholmondeley’s annular grillage coefficient. Initially, n was measured with the aid of a metapolar refractive pilfrometer … but up to the present date nothing has been found to equal the transcendental hopper dadoscope. … Undoubtedly, the turbo-encabulator has now reached a very high level of technical development. It has been successfully used for operating nofer trunnions. In addition, whenever a barescent skor motion is required, it may be employed in conjunction with a drawn reciprocating dingle arm to reduce sinusoidal depleneration.”

This entry was posted on Thursday, April 2nd, 2009 at 8:45 pm and is filed under Open Discussion. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.